Grizzly T26487 - 10" x 40 Ply x 7/8" Loose Muslin Buffing Wheel, 3200 RPMThese buffing wheels are made for final finishing. Our Canton flannel seamless wheels are an airway type and much softer than Muslin. They are also used for bringing out high luster in both metals and non metallics. The cool running design is excellent where heat is a concern. Several guitar manufacturers use this wheel for final buffing acrylic and polyester finishes. 10" x 7 8" x 40 Ply Canton Flannel Buff Wheel, 3200 RPM.

This 37" x 60" 80 grit belt uses tough Aluminum Oxide grain

9271 Height:

264 FT3   |

and 240 grit 8-hole sanding discs and 1 each of 60

The G0865 manual was written by our U

locks are securely trapped by the full-perimeter cross tube sleeves and can't become dislodged or disengaged

Two 120V outlets for plugging in portable sanders

7252 NT NT1007 AIRLESS SPRAY TIP

These sanding belts are the best quality belts for our G1015 Knife Belt Sander/Buffer

and solid bar

* Needs to be pressure fed from a pressure tank

Bleed-Type