Blacksmith Anvil Fire Complete Fire Brick SetThe complete fire brick set for the Blacksmith Anvil replaces all the vermiculite liners inside the firebox in one go. Fire bricks protect the steel walls of the firebox from direct flame contact and reflect heat back into the chamber to improve combustion efficiency. Replacing the full set makes sense when multiple bricks are cracked or when one section has deteriorated to the point where the stove body is exposed. Compatible with: Blacksmith Anvil

so both models are covered by this panel

When the rope flattens or burns away the stove becomes harder to control and smoke can leak into the room

which reduces glass clarity and can lead to smoke escaping around the door glass

The grate frame (also known as an inner riddling grate or centre grate) for the Hi-Flame Precision Inset is a cast iron component that supports the fuel bed and allows ash to fall through into the ash pan below

sitting above the fire to hold heat inside the combustion chamber and support more complete burning

The ash pan sits beneath the fire grate on the Olymberyl Maximus

throat plate)

allowing a direct swap when the original becomes cracked

The frame matches the original Harness dimensions exactly and replaces the worn part without modification

ROBAX ceramic glass is rated for continuous high-temperature operation and maintains its transparency and structural integrity over many years of stove use

The grate frame for the Hamco Glendine is the outer cast iron carrier that forms the base of the fire grate assembly

This matched pair is the correct replacement for the Anvil model