99212 - SKF Speedi-Sleeve - Max. Shaft Diameter 54.1mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

RNA 49 18 UU Single Row Caged Needle Roller Bearing Dimension Series 49 105mm - Bore Size 2 Rubber Seals

The dimensions of this 29412E bearing are 60x130x42mm

This 2MM214WICRDUL bearing is a Super Precision Angular Contact Bearing with a 15° Contact Angle and a Phenolic Cage

32 06 B 2RS TN Light Series 30mm - Bore Size 25° Contact Angle and No Filling Slot Rubber Seals on Both Sides Polyamide Cage Standard Internal Clearance

This SNL526V bearing is a Plummer Block Housing with grease escape hole in the base

This 67388-90018 bearing is an imperial taper roller bearing

2 13 Deep Groove Ball Bearings 65mm - Bore Size Metal Shields on Both Sides of Bearing Normal Radial Internal Clearance

The 25X52X8CRW1R is a radial shaft seal from SKF

This SF682 2Z ZEN bearing is a Stainless Steel Flanged Shielded Miniature Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 2x5x2

this bearing also has a larger than standard radial internal clearance The bearing's dimensions are 15x32x9

No Flange on Outer Ring Light 25mm - Bore Size Extra Capacity Design Glass Fibre Reinforced Polyamide Cage Normal Internal Clearance

The NA4914 is a Standard Duty Open Type