Custom Coilover Springs 5KG / 200MM / 62MM ID (set of 2)Godspeed Project custom springs are made from SAE9254 steel wire and cold wound. These springs provide perfect solution for tuners looking to swap to a different spring rate setting due to driving situation and car setup. Godspeed Project custom springs are available in 8, 10, 12, 14 and 16 kilogram per millimeter(please see chart for specs.) With 62 mm I. D.(86 mm O. D.) will allow these springs to fit most coilovers within dimension range in the

14 x t-bolt Clamp

49131-07030

3" Stainless Steel Turbo Downpipe

49131-07015

since you don't have to trim or fit the heat shield blanket in order to fit your turbo housings

Solid yet lightweight mounts bolt to existing engine block and chassis holes

Damping Levels 16 Levels Height Adjustment Yes Spring Rate(Front) 8 kg/mm (448 lbs/inch) Spring Rate(Rear) 6 kg/mm (336 lbs/inch) Spring Length(Front) 180 mm Spring Length(Rear) 200 mm Front Top Mount No Rear Top Mount No

06F145701G

Rubber Bushings Included If Applicable

Increase aerodynamic downforce with a beautiful 4-fin diffuser set for Subaru BRZ (ZC6) 2013-2020

1990 1991 1992 1993 1994 Toyota MR-2 3SGTE motor

This turbocharger can also to use as an upgrade to IS12 and IS20 with proper tuning software