MAD Wurks Carbon Roll Center Shim Set .5/1/2mm Awesomatix A800R (12)MAD Wurks Carbon Low Roll Center Shim Set for the Awesomatix A800R (12) These roll center shims are can be installed without unscrewing the ball completely from the screw for quick roll center changes. Quickly remove the shims by loosening the screws and using a small pick or 1. 5mm wrench. Save your sanity and skip the fumbling with round shims. Includes: (4) . 5mm (2 front, 2 rear) (4) 1mm (2 front, 2 rear) (4) 2mm (2 front, 2 rear) Features: Each

Adding too much flex can sacrifice rear end stability

MAD Wurks Front Split 3 Hole Shock Tower Mi9 (1)

Adding flex allows the rear of the car to roll more and better wrap the corner

You also can cut from the front bridge into the adjoining screw hole

we have found generally that you will want more rigidity in the front bulkheads than you might have seen with some other cars

xra301322-h)

5 degrees static with

For further tuning options

Make sure you put your car back on the setup station and adjust for the correct rear toe as well as toe gain

We typically prefer in most classes 2

The MAD Wurks 3d printed low profile flex bumper was designed for VTA

including team drivers