DR Vacuum De-Gassing UnitDegassing Unit The function of Vacuum Degassing unit is to suck the air bubbles that remain in the synthetic resin or composite material mixes and in silicone or similar compounds during their preparation. The presence of bubbles, in fact causes a drastic reduction of their technical features and negatively affects their appearance. DR degassing units comprise of: One or two welded sheet steel autoclaves, featuring a perfect vacuum seal, equipped with

NOTE: OF foam rubber is obtained by the expansion of a natural rubber

Any air leak from the wrapping due to a defecting welding is proved by bubbles that indicate the exact point of the welding that’s leaking

- An anodised aluminium manifold provided with vacuum connections and a built-in filter easy to inspect

item 07 06 13 for item FS 50 BP and 2” gas servo-operated vacuum solenoid valves

Under this condition

PDF Data Sheet for products: MVG10 MVG14

The check valve on the suction line is an integral part of the pump and is standard while a filter suitable for trapping any suctioned impurities can be supplied upon request

The lack of springs

Tolerance permitted on the nominal voltage value: ±10%

These cups are produced in a special compound called BENZ

they are able to retain fine and impalpable dust interfering with the flow rate in a negligible manner

Compounds: A - Oil Resistant Rubber   N - Natural Para Rubber   S - Silicone