Maretron Mini Termination Resistor w/LED - Male [TRL-NM]Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the

Nylon Carry Case with Zipper

AWM 80° C 300V

Heavy Duty Blowers are designed for applications such as commerical or high use engine room ventilation and extraction where a long life requirement demands heavy duty motors with long brush life

1-1/2" diameter

There are 3 and 4 blade

PN:  7142

a return/fill line must be installed to connect the cases of all helm pumps together

If you want the most your boat and engine combination can offer

Very often the livewell tank will be above the waterline of the boat

Mounts in panels up to 0

This thru-hull version mounts on a 13-24° deadrise angle

8059 AC 8 Position Toggle Circuit Breaker Panel