AMCX24-MFT | Belimo | Damper ActuatorConfigurable, Damper Actuator, 180 in lbs [20 Nm], Non fail safe, AC DC 24 V, DC 2 10 V For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturers specifications. The actuator is mounted directly to a damper shaft up to 1. 05 in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct

Differential Pressure Sensor Air

EFB120-S Damper Actuator

Selecting the sensor type is accomplished via connection to the integrated web server (RJ45 connection to the web browser) or directly via the Belimo Cloud

frequency and alarm outputs

Shafts up to 3/4” diameter can be accommodated by an accessory clamp

multifuncitional control

The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage

The Series 629C Wet/Wet Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0

• Control: Open-close or 3-point

The actuator is mounted directly to a damper shaft up to 3/4” in diameter by means of its universal clamp

The actuator operates in response to 10 k

LMCB24-3-T Damper Actuator