10.9 CLASS Door Hood Tailgate Hinge Torx Screws Bolts for Jeep Wrangler JK (6)If you're looking for the best replacement Torx screws for your Wrangler JK look no further. These are the strongest available anywhere. These are 10. 9 Class (metric equivalent to Grade 8) hardened and black zinc plated. The OEM screws were only 9. 8 Class (halfway in between Grade 5 and 8) and all other replacements on the market are 8. 8 Class (Grade 5) or less. We hate having to drill out broken screws and dealing with stripped Torx heads so we

9 Class hardened 30mm x 3mm thick heavy duty washers just like the factory bolts

(8) Grade 170M (Stronger than Grade 8

The tailgate hinges use 6 screws

yellow zinc plated flange bolts for 4

It's also important to note on this set that we didn't cheap out on the M14 bolt

Pair of Mopar OEM new old stock torx screws for the hood latch on 1984-2001 Jeep Cherokee XJ and 1986-1992 Jeep Comanche MJ

2005-2006 Jeep Liberty KJ Diesel

Includes: (6) Metric Class 10

The knurled section on the shaft increases the diameter of the bolt in that section for a tight fit and no vibration from the starter while at the same time minimizing the contact area so it will not seize in place

9 Class (metric equivalent to Grade 8) hardened yellow zinc plated flange bolts for attaching the motor mount brackets to the engine block on 2003-2006 Jeep Wrangler TJ with the 2

Note about the front lower axle side bolts: All Grand Cherokee ZJ's came from the factory with cam bolts on the front lower axle side

Pair of replacement pivot bushings / grommets for the rear seat mounting brackets on 1997-2002 Jeep Wrangler TJ