LP390-22.5 | LP390 UV-Absorbing Protective WindowThe MidOpt LP390 22. 5 filter is absorptive and blocks ultraviolet (UV) light while allowing high (>90%) transmission of visible and near IR light. Most silicon camera sensors have some sensitivity in the UV spectrum. In some color cameras, this light is typically recorded as blue, resulting in an exaggerated bluish tint. These filters are well suited for color imaging applications as they absorb UV light and are precision ground and polished to

Specifications + Useful Range Min 415 nm Useful Range Max 1100 nm Stabledge Yes Secondary Useful Range Min 415 nm Secondary Useful Range Max 1100 nm Third Useful Range Min 415 nm Third Useful Range Max 1100 nm Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 98 % Surface Quality (Scratch-Dig) 80-50 Substrate Material Acrylic Filter Diameter M48 x P0

The RCC130-470 is in the 470nm Blue color and features a narrow uniform pattern lens

1 mm in air Operating Temperature Range -10 to +50 °C Storage Temperature Range -20 to +60 °C Dimensions 34 × 34 × 36

External driver/controller included (24 VDC)

BL31316 Specifications:

This model is 100mm x 100mm and emits 625nm Red color

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 17 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 1 ms Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 17

Brand Advanced Illumination Series DF241 Wavelength 470 Color Blue Driver I3S Ingress Protection Not Rated Inner Diameter 93

15 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Colored Glass Filter Diameter M22

Advanced Illumination LL137G-12WHI24 Downloads:

Advanced Illumination DL15132-53024 Downloads:

BL-S100150 Specifications: