80 Meter Half-wave Dipole Ham Radio Antenna with 1:1 chokeHalf wave 80 meter dipole antenna with internal 1: 1 choke balun. It measures approximately 133 feet, 8. 56 inches (133' 8. 56"), split as approximately 66 feet, 10. 28 inches (66 10. 28) on each side. Made from high quality 16 AWG stranded insulated wire. The center feed point can be held up by rope or however you see fit using the eye lit loop on top, and you can tie into the ends with something non conductive like nylon, hemp, etc. Run your feed

If you are intending on using a low loss feed like RG8

Elements will be spaced about an inch apart where they exit the center insulator

and the other measures approximately 17 feet

and you can tie into the ends with something non-conductive like nylon

8 to 54 MHz (160 meters through 6 meters

and 2 meters

The 20 meter legs measure approximately 16 feet

and you can tie into the far ends of the wires with something non-conductive like nylon or hemp rope

Elements will be arranged from top to bottom as large to small (10

Half-wave Fan Dipole antenna for 30 and 15 meters

Elements will be arranged from top to bottom as large to small (40

Half-wave Fan Dipole antenna for 10 and 6 meters