Charnwood LA45iB / LA50iB Stove GlassReplacement stove glass for the Charnwood LA45iB and LA50iB inset stoves. These are the larger boiler capable models in the LA range and both use the same flat glass panel. The glass is held in place by a channel seal rather than separate glazing bars, making it straightforward to remove and replace. Compatible with: Charnwood LA45iB, Charnwood LA50iB Specifications Dimensions: 260mm x 172mm x 4mm Material: Schott ROBAX high temperature ceramic glass

the older version of the model before the redesign

Part type: Top baffle plate / throat plate

This kit contains everything needed to replace the seal cleanly

or stained with tar deposits

Worn inner grates reduce the open area through which primary air reaches the fuel bed

1 x Side Brick 2 – 321 x 240 x 25 mm

A damaged or warped ash pan can allow ash to build up on the floor of the firebox

The fire fence bars on the Regis stove prevent burning logs from rolling forward out of the firebox during refuelling

The door rope seal on the Hi-Flame Precision III (HF910) creates an airtight barrier between the stove door and the body

Replacing it when worn keeps the airwash system working correctly

Hamlet Solution 5 Inset

or seize over time