Point Source Audio CON-SE - 3.5mm Locking Connector (for Sennheiser Evolution)Screw locking 3. 5mm connector for hard wired Point Source Audio microphones. For brands such as Sennheiser (Evolution series).

HF boost above 16khz with a 20dB bump above 50kHz to capture HF information normally

The AMS-10K contains a long-life 10 kΩ potentiometer for adjusting the control voltage

Protection circuitry for short circuits

It has been designed for use in boardrooms

Complete recording-transport controls:

knurled shielded or molded black plastic handles

Their output is added to the line (front) microphone signal when the rear rejection switch is in the on position to suppress low frequency background sensitivity

w/ end rings

the dedicated charging port can source up to approximately 5 watts

dynamic cable made

from automixing to loudspeaker management

this microphone opens up to a new dimension of studio recordings