7 Pin 2.54mm pitch Male and Female Relimate Connector 2510The 7 Pin 2. 54 Male and Female Relimate Connector is ideal for use as power connectors, sensor connectors, or any general purpose connection that needs to be protected from an incorrect connection or reverse polarity. The connector comes with a compatible male connector that can only be mated in one direction. The 2. 54mm pitch male connector can be easily soldered onto a standard prototype board. Relimate connectors are another type of wire to board

These are Metal Film Resistor with a value of 22k ohm 1/4W and tolerance of ±1%

The two probes allow the current to pass through the soil

A rotary switch features a rotating spindle on which the rotors are attached

Power required  22

Built-in regulator (no external logic voltage supply needed)

During installation

Switching Loads under 150mA

Use this sponge to clean your soldering iron tip to extend its life

FL connector

Input Logic Thresholds Compatible with 5V to 15V Logic Levels

supports bandwidth up to 18Gbps

5mm Holder Height 13mm Transmittance Rate 95% Beam Angle 60° Len Colour Water Clear