SD 35-2-10FT - RENOLD 3/8 Inch Pitch SD Roller ChainThis Renold Standard Duty roller chain is the new benchmark in economy chain. Despite being an ecomony chain it is still built with the same consistent quality and comes in an extensive range of both European (BS) and ANSI. This Duplex chain has a 3 8 Inch pitch and is 10ft in length.

NJ 23 05 E TVP2 Two Flanges on Outer Ring and One on Inner Ring Medium

BSR 15 60 SL Endless Linear Motion Type Width - 15mm Length - 60mm Stainless Steel

This MHT15C2R480T1HS2 is a maintenance free high rigidity ball type series linear way with a rail length of 480mm

The NJ318ECJ/C3 SKF bearing is designed to handle high-speed operations while maintaining low noise and vibration levels

One Flange on Inner Ring Medium 35mm - Bore Size Extra Capacity Design Glass Fibre Reinforced Polyamide Cage Normal Internal Clearance

This 32006XA bearing is a metric taper roller bearing

offering consistent performance in diverse operating conditions with the recommended operating temperature ranging from -20°C to 130°C (-4°F to 266°F) - 140°C peak (284°F)

The NJ2328ECML/C3 SKF bearing is designed to handle high-speed operations while maintaining low noise and vibration levels

This LDJ30 R&M bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 30x62x20

This GEZ 204 ES 2RS bearing is a imperial steel/steel spherical plain bearing with a rubber seal on both sides of the bearing and a standard radial internal clearance

This MHDG30C2R800T1HS2 is a maintenance free high rigidity ball type series linear way with a rail length of 800mm

The BTM130 B/P4CDBB bearing is made up of two non-separable Single Row Angular Contact Bearings in a back-to-back arrangement and are designed to accommodate axial loads in both directions while providing a high degree of system rigidity