4mm Diameter 30 Metres of Silicone Vacuum TubingPlease note, the diameter measurement refers to the internal diameter. 4mm Diameter 30 Metres of Silicone Vacuum Tubing Technical Details 3mm and 4mm diameter have a wall thickness of 2mm. 5mm diameter has a wall thickness of 2. 5mm. 6mm and 8mm diameter have a wall thickness of 3mm. Manufactured from the finest high tear strength 65Shore hardness silicone polymer. Manufactured under the ISO 9001 quality system.

A Please also test for clearance after fitment at the wheel arch under full right and left wheel lock

A replacement diaphragm for your Forge Motorsport actuator

Interestingly there has been lots of divided opinions about our intake requiring a heat shield

Manufactured from 6026 grade aluminium

By using the associated service kit (FMDVSK)

1 x 50mm of 6mm Vacuum Tube

The OEM valve uses a rubber diaphragm and a plastic housing

Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible

progressive rate spring that can allow for the retention of boost pressure up to 34 PSI which will be dependant on the state of tune of your vehicle

76mm O/D 500mm long Alloy Hose Joiner

This kit will include all the parts required for atmospheric or recirculating set up

Would 100 percent recommend Forge to anyone ⭐