LMQX24-MFT | Belimo | Damper ActuatorConfigurable, Damper Actuator, 35 in lbs [4 Nm], Non fail safe, AC DC 24 V, DC 2 10 V For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturers specifications. The actuator is mounted directly to a damper shaft from up to 1. 05 in diameter by means of its universal clamp. The default parameters for 2 to 10 VDC applications of the MFT actuator are assigned during manufacturing. If

Actuator can be controlled by any compatible LON system

AFRB24-SR Fail-safe Actuator

PMB series damper actuators are designed to accommodate a mounting bracket and coupler or linkage for remote linkage connection

Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation

EFB120-S Damper Actuator

AMX120-SR Damper Actuator

OR Maximum of three EF’s can be piggybacked for torque loads of up to 810 in-lbs

NO2 (0…10ppm)

05” in diameter by means of its standard universal clamp

Actuators must provide proportional damper control response to a 2 to 10 VDC or

FSAF120A Fire & Smoke Actuator

Minimum 1” diameter shaft and parallel wiring