3 Pin Screw Type PCB Terminal Block - 3.8mm Pitch ZB128This 3 Pin Screw Type PCB Terminal Block 3. 8mm Pitch ZB128 is a Pluggable Screw Terminal Block with a compact and versatile design. It finds its use in connecting wires to the PCB. Due to its small size, the terminal block connects two conductors on a PCB, where space is a concern. Wires ranging from 26 to 16 AWG can be screwed into this ZB128 3 Pin PCB Mount Screw terminal block. These terminal blocks have a 150V voltage rating and a current rating

Brand Bourns Resistance 100 ohm (101) Power Rating 500 mW (1/2W) Rotational Life 200 Cycles Number of Turns 25 Tolerance 10% Number of Pins 3

such as hard drives

Switch Current

Industries

Positive to Negative converter (Inverting

The LM2596 regulator series is a monolithic integrated circuit that provides all of the active operations for a step-down switching regulator capable of driving a 3A load with excellent line and load control

Tape Length 25 Meter Tape Width 1Inch (25mm) Type Double Coated/Sided Tape Color Clear PET Protective Film Color Red

Independently Drives 4 N-Channel FET in Half-Bridge or Full Bridge Configurations

Number of I/O pins

These are Carbon Film Resistor with a value of 27 ohm 1/2W and tolerance of ±5%

DC female power jacks are typically used to connect adapters to your circuit board

pin status