Airgas Single Stage Brass 0-25 psi General Purpose Cylinder Regulator CGA-296This general purpose, single stage regulator is well suited for closely monitored, short run work. The stainless steel diaphragm makes it suitable for analytical applications. The regulator has a unique design to reduce weight and make the regulator more durable. The composite bonnet and the outlet valve are incorporated into the regulator body to reduce weight. The external nickel plating, along with the composite bonnets, allows the exterior

They are also equipped with a reverse-flow check valve to prevent backflow of gas into the regulator on the outlet

These regulators also have a proprietary Supelcoat™ coating that prevent interaction of corrosive and volatile compounds in high purity gas mixtures used in EPA analysis

with its 316 stainless steeldiaphragms

Optional 15 Ra electropolished with faceseal

calibration kits

The composite bonnet and the outletvalve are incorporated into the regulator body to reduceweight

Choose a brass model for analytical or non-corrosive service or a stainless steel model for mildly corrosive service

These units feature stainless steel diaphragms and bar stockbodies with low internal volume and minimal dead space

These two-stage regulators are specifically designed for low-flow

research laboratories for hydrogenation

The metal-to-metal diaphragm seal prevents contamination by eliminating the need for a soft seal and provides a leak-rate design of less than 2 x 10–8ccs helium

Machined from brass bar stock