20 AWG Multi-Strand Teflon Wire 20/19/32 (Black) 100 MeterPTFE is a higher grade insulating polymer compared to other fluorocarbons that are used in the extrusion process. PTFE insulated equipment hookup wires are commonly used for internal wiring of various electronic and electrical equipment, as well as for other electrical uses. They are most suited for usage in high frequency signal processing equipment. Because of the uniformity of the insulation layer surrounding the conductor and the very low

Brown for these 56E resistors

These are Carbon Film Resistor with a value of 22k ohm 1/2W and tolerance of ±5%

Brown for these 20K resistors

After clearing the stored transmitters

8° Rated Current per Phase 2

The body of the connector is made from tin-plated brass and features an additional internal copper sleeve

refer to Datasheet

1€š¬�)

Power-on Reset and Programmable Brown-out Detection

It includes a SIM card holder and an SMA antenna connector

These are Carbon Film Resistor with a value of 68k ohm 1/8W and tolerance of ±5%

Parameter Values Model ACS712-05 Supply Voltage 5