90 Degree Joiner to suit Galvanised Box DrainMade from fully hot dip galvanised steel, our joiners are available to suit our box drain in the following sizes: 125mm wide x 80mm deep 150mm wide x 125mm deep 200mm wide x 170mm deep 300mm wide x 170mm deep Used to join 2 lengths of galvanised box drain together on a 90 degree angle, they can be easily screwed on to join lengths together. All that is required is to cut the box on the angle, insert it into the joiner and screw it into place.

The Hex Head Screws are sold in a pack of 25 screws and we also have a drill bit to suit the screws

900mm x 900mm x 50mm deep The 900mm x 900mm version includes the tops being supplied in 2 pieces with a support bar down the middle underneath the trays to provide additional support

Please check our Care Guide for Stainless Steel Products

and civil construction

Heelguard Pattern: Pedestrian-safe bar spacing in a heavy-duty frame - no compromise on safety at any load class

Right Size for Standard Openings: The 8mm wall thickness and 100mm leg dimensions are the established specification for residential brickwork openings

PVC and PETG Materials: Configuration options suit both standard PVC and higher-impact PETG requirements depending on the installation

Sizes run from 300mm x 300mm up to 1200mm x 1200mm depending on load class

heelguard grate and frames are available in a range of sizes in both light and medium duty (depending on the size you require)

Carry heavier loads and longer spans with the wall-bearer concrete lintel built for serious brickwork openings

5 210 205 14

Made with a full stainless steel box and outlet underneath