ER-Collet with cooling channels ER32 | 470ECC | < 15µm | Ø 16Application: For mounting straight shank tools in collet chucks DIN 6499. Note: Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

Hardening depth 0

5 x 58 x 18

With built-in tightening bolt All holders are made of forged steel

Mit mechanischem Spannkraftverstärker

20mm for over 500mm/20" range

Dial Graduation: 1°

Capacity = 1 - 10 (ER 16)

Memory : 100 Readings

The spring-mounted spherical tip protects the unit from damage if contact is too strong

6 fl ange nuts

The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter

Operating Temperature : -10C~55C