Fortigate 50e 1RU Rack Mount3D Printed rack mount that lets you mount your FortiGate FortiWiFi 50E into 1 RU! Also works with the 51E Models as they share external dimensions. The design also incorporates Keystone Sockets so that you can route the WAN LAN interfaces around to the faceplate. (Keystone Jacks and Patch Leads are not included) Your Firewall slides into the frame from the back after removing the back plate and the Rack mounting arms screw into the side of the frame

The Sonos Port slots in from the front

so you can either use a Blanking plate to mount this device on its own

Do you need to have text or a logo printed on the front

Includes both arms and screws for fixing them to your Switch and then the Flex Mini slides in from the back and is fastened in place by a removable Back Plate

1 with just the USG and 1 that also includes 4 Keystone sockets (Keystone Modules not included)

You can even join 2 of these to suit up to 12 Panel mounts

or Nvidia SHIELD PRO device

3D Printed 1RU rack mount for the Philips Hue Bridge v2

NOTE: You will need to pair this with another ModMount item (Like a pair of Blanking Plates or another Mac Mini Mount

This item is Omni directional

you can also secure the sleds with a screw if required

To install your AMP