Measurement of hygroexpansivity of paper and board - Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68%

The FM sound transmitter is connected to a test load with an impedance expressed in return-loss relative to the nominal load impedance of the transmitter of not less than 26 dB at frequencies within the FM broadcasting band and 16 dB at frequencies of any measured unwanted frequency outside this band

BS EN 235 discusses cleanability terms

Influence of recovery periods pattern and work time duration in determining the overall number of reference technical actions within a shift (RTA) and

— EN 13445‑4:2009

intended for use with more than one independent draw-off tap

motility and cell morphology

it is necessary to be sure that the sample does not contain major impurities or is thermally degraded

This technical report addresses data from several different transport aircraft1

Why should you use BS 9220 N001 - (2:1) Rigid waveguide tubing specification

The hazards covered by this Part of EN 818 are identified in clause 4

Electrically driven vehicles which are intended to be used for travel on public roads

— integral burners under the control of fully automatic burner control systems