Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly - 90° peel1 Scope This part of EN 28510 specifies a 90 peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where at least one adherend is flexible. If a normal tensile testing machine is used for the test, the peel angle will not be constant at exactly 90. If a constant angle of exactly 90 is required, a roller peeling device is used (see 4. 1). The 90 peel test is particularly suitable for

diagnostic evaluation and care of patients:

This specification does not describe any implementation details

Fuel cell modules might be provided either with or without an enclosure and might be operated at significant pressurization levels or close to ambient pressure

Control systems are usually only those which involve the electrical closing of switchgear devices

— automatic tool change (see clause 5)

BS EN 62382:2013 includes the following significant technical changes with respect to EN 62382:2007:

ANF-RRC permits a Route Access Class (RAC) to be associated with a call to indicate its entitlement to use certain facilities during routeing

Fire extinguisher service companies

Who is BS EN 14761 - Vertical finger and module brick wood flooring for

The aim of this standard is to specify such fundamental principles as appear desirable to ensure reliability and safety of overhead runways

product samples and test pieces

Annex A specifies sequential sampling plans and procedures indexed in terms of the acceptable quality level (AQL) to supplement the system of sampling plans in ISO 3951